Welcome to Noby UK
Cabling
ISO9001:2000 Approved by EAQA

FIRECEL® SR 114H

Features

Overview

Specification

Features
  • LSZH (Low Smoke Zero Halogen) Construction
    Combustion gases with very low toxicity, low smoke emission, and no corrosive gas, for the safeguard of human life.
  • Does not propagate flame
    Limiting the spread of the fire along the cable run, flame barriers can be avoided or reduced.
  • Pliable
    Very flexible construction that makes the installation very easy in all conditions.
  • Protected against electrostatic noise
    Cable is fully screened.
  • Moisture Resistant
    No special terminations are required to prevent moisture absorption. It can be installed in damp environments.
  • Suitable for data transmission
    Twisting of conductors make the cable suitable for clear data transmission.
  • Easy to install with low cost
    No special tools and special training are necessary. Easy cable to strip.
  • Quality Assurance
    In order to satisfy QA requirements, traceability is assured by batch number printed on outer jacket. All reels have the evidence of testing.

Overview

FIRECEL® SR 114H is a well established brand of fire resistant cable, present in the market for many years. The cable is approved to the following standards:

  • BS 6387 cat. C W Z / SS 299 part 1
  • IEC 60331
  • IEC 60332-3
  • BS 7629:1997
  • EN 50200 PH90
  • EN 50266
  • LPCB
    Product Certificate No. 217e/01 assessed to BS 7629, BS 6724 BS 6425: Part 1 and BS 6387 CWZ(cables up to 4 cores 4.0 sq.mm)

A range of accessories are also available, including P-Clips, Cable Glands and Shrouds, as listed on the order form.

For a full product datasheet (pdf format) on the Firecel SR114H cable, please go to our downloads section, or to order please see our ordering information.

Technical Specifications

Voltage rating

single or three phase circuit up to 300/500 V r.m.s. or up to 750 V d.c. circuit

Temperature rating - for insulated conductors only

–40 to +90 °C max +200 °C

Cross section (sq.mm)

1.5

Conductor resistance (Ω / km at 20 °C)

12.1

Insulation resistance (MΩ x km at 20 °C)

300

Capacitance (pF / m) - core/core

110

Capacitance (pF / m) - core/screen

190

Construction

Conductor

solid plain annealed copper wire
(BS 6360 class 1 and class 2)

Insulation

high performance silicone rubber (GS)

Screen

aluminium/polyester tape with tinned copper earth conductor

Jacket

LSZH-M1 thermoplastic compound
(type LTS3 to BS 7655 section 6.1)

No. Of Conductors

2

Cross-Section

1.5 sq.mm
[Home] [Products] [Fire] [Security] [Comms] [PSUs] [Other] [Ordering] [Services] [Quality] [Support] [About Us]