Relay-1 Module Product Page

Features


	Overview


	Specification

Overview

Features

single 12 Volt DC relay
two changeover contacts
contacts rated up to 2 Amp at 30 Volt DC
transistor driven

The Relay-1 Module features a single 12V relay for your switching needs.

The relay has two changeover contacts rated to an absolute maximum of 2 Amps at 30 Volts DC.

The Relay-1 operates from a 12 Volt DC supply and accepts a separate positive 12 Volt DC input signal to operate the relay. This input can be from a low current source, even down to 10mA.


	[Back to Top]

Technical Specifications

Power Supply Unit	*Value*	*Unit*	*Comments*
Supply Voltage	12	volts DC

Connections	*Value*	*Unit*	*Comments*
No. of contacts per relay Contact rating	2 2	Amps	at 30 Volts DC
Trigger Input: Resistance Switching voltage (high) Switching voltage (low)	22 4 1.5	Kohms volts volts

PCB	*Value*	*Unit*	*Comments*
Dimensions (width x depth):	56 x 30	mm
Shipping Weight	24	g


	[Back to Top]


	[Home] [Products] [Fire] [Security] [Comms] [PSUs] [Other] [Ordering] [Services] [Quality] [Support] [About Us]

Overview

Features

Technical Specifications